7 simple steps to update your device with the latest v875 map

To update your device with the latest v875 map, follow these simple steps:

1) VERY IMPORTANT: Connect your device to your computer via USB. Using Windows Explorer, open your TomTom drive and backup the complete contents of your TomTom.

2) Check your navcore version. You can do this either on the device menu under Version Info, or you can check the navcore version in TomTom Home when the device is connected to your computer.

3) Check which map is compatible with your navcore using the latest v875 compatibility chart here:



4) Delete the old map folder.

5) Copy across the new map folder into the root of the device.

6) Download the latest version of FastActivate Premium Edition from the FastActivate thread here:


Unzip the file and copy across FastActivate.exe to the TomTom drive (the root of the device).

7) Run FastActivate.exe from the TomTom drive, clicking on all 4 options in order, waiting for each to complete:
Update meta, activate maps, patch navcore & home.


The v875 Australia maps you'll need are found below:

TUTORIAL: Clean Install - How to install the latest map and navcore from scratch!

This tutorial is for TomTom standalone devices only - not WinCE or PDA devices. In addition, if your device was made anytime from September 2010 onwards, (for eg. the GO 1000 series, GO LIVE 800 series, Start 20 series and all VIA models) it cannot be updated this way, as mentioned here:



Before proceeding with this tutorial, if your device has a card slot and you normally use the card, insert it now. As long as the card is inserted, it won't affect the internal memory (if your device has internal memory).


Follow these steps precisely and you will have updated software, as good as new!


1) VERY IMPORTANT: Connect your device to your computer via USB. Using Windows Explorer, open your TomTom drive and backup the complete contents of your TomTom.

2) Open your TomTom drive and delete the contents.

3) Install the latest version of TomTom Home from the TomTom website.

4) Run TomTom Home. Depending on your model, if Home asks you whether to use internal memory or the card, select the card.

5) Go to updates and download the latest navcore. Restart TomTom Home and run updates several times until no more updates are available.

6) Unplug your TomTom device. Start your TomTom on its own. This will create a new ttgo.bif file which will be needed for patching later.

7) Check your navcore version. You can do this either on the device menu under Version Info, or you can check the navcore version in TomTom Home.

8) Reconnect your TomTom to your computer.

9) Run TomTom Home on your computer and go to the "Operate" function. This may be called "Operate My TomTom" or "Operate My Go" or similar, depending on your model. You may get an error message when doing so, just ignore it. The purpose of running the Operate function in Home at this stage is to create the dll profile needed for patching later.

10) Shut down TomTom Home.

11) Check which map is compatible with your navcore using the latest compatibility chart here:



12) Download the compatible map. For Australia, use one of the following:

- for Navcore versions 8.2xxx or higher

- for Navcore versions under 8.2

13) Extract the map, and copy across the new map folder into the root of the device. Make sure when you open the map folder it only contains the map files, not another folder within a folder.

14) Copy across the Voices folder from your backup into the root of the device. Or you can download free voices from TomTom Home.

15) Download the latest version of FastActivate Premium Edition:



16) Extract the file and copy across FastActivate.exe to the TomTom drive (the root of the device).

17) Run FastActivate.exe from the TomTom drive, clicking on all 4 options in order, waiting for each to complete: Update meta, activate maps/cams, patch navcore & Home.

18) Disconnect your TomTom from the computer and power it on.

How to save your favorites when updating your device

To save your favorites, recent destinations and other settings from an old map, follow these simple steps:

1) Copy paste your old mapsettings.cfg file from the old map folder into the new map folder. Overwrite when prompted.
2) Run  HOME and go to the "Operate" function
3) In the menu, add a new Favorite - any favorite (you can always delete this later).
4) Reboot. Test.

The above procedure saves the mapsettings.cfg in the correct format. It is often the solution to many rebooting or freezing problems.

If you can't get into the Operate function in HOME, then you need to patch HOME with FastActivate Premium Edition.

TUTORIAL: Clean Install - How to install the latest map and navcore from scratch!

This tutorial is for  standalone devices only - not WinCE or PDA devices. In addition, if your device was made anytime from September 2010 onwards, (for eg. the GO 1000 series, GO LIVE 800 series, Start 20 series and all VIA models) it cannot be updated this way, as mentioned here:



Before proceeding with this tutorial, if your device has a card slot and you normally use the card, insert it now. As long as the card is inserted, it won't affect the internal memory (if your device has internal memory).


Follow these steps precisely and you will have updated software, as good as new!


1) VERY IMPORTANT: Connect your device to your computer via USB. Using Windows Explorer, open your drive and backup the complete contents of your TomTom.

2) Open your  drive and delete the contents.

3) Install the latest version of TomTom Home from the TomTom website.

4) Run TomTom Home. Depending on your model, if Home asks you whether to use internal memory or the card, select the card.

5) Go to updates and download the latest navcore. Restart TomTom Home and run updates several times until no more updates are available.

6) Unplug your TomTom device. Start your TomTom on its own. This will create a new ttgo.bif file which will be needed for patching later.

7) Check your navcore version. You can do this either on the device menu under Version Info, or you can check the navcore version in TomTom Home.

8) Reconnect your TomTom to your computer.

9) Run TomTom Home on your computer and go to the "Operate" function. This may be called "Operate My TomTom" or "Operate My Go" or similar, depending on your model. You may get an error message when doing so, just ignore it. The purpose of running the Operate function in Home at this stage is to create the dll profile needed for patching later.

10) Shut down TomTom Home.

11) Check which map is compatible with your navcore using the latest compatibility chart here:



12) Download the compatible map from the TomTom Maps section:



13) Extract the map, and copy across the new map folder into the root of the device. Make sure when you open the map folder it only contains the map files, not another folder within a folder.

14) Copy across the Voices folder from your backup into the root of the device. Or you can download free voices from TomTom Home.

15) Download the latest version of FastActivate Premium Edition:



16) Extract the file and copy across FastActivate.exe to the TomTom drive (the root of the device).

17) Run FastActivate.exe from the TomTom drive, clicking on all 4 options in order, waiting for each to complete: Update meta, activate maps/cams, patch navcore & Home.

18) Disconnect your TomTom from the computer and power it on.

Exécuter cccam et newcamd sur samsat HD55 via USB Read more

Aujourd'hui, nous allons expliquer le fonctionnement des lignes cccam et newcamd avec samsat HD55
Ainsi que la façon de mise a jour les lignes par USB.

Pour exécuter le serveur cccam pas de moyen facile et le processus en suivant ces étapes:
Ouvrez le Bloc-notes et d'écrire une ligne comme suit:

cfg~0~0~00000000
cccamd~HOST~PORT~USER~PASS

Ensuite, enregistrez le fichier avec ce nom: hsdata.cfg

Et mettre ce fichier dans la clé USB.

Puis placer le flash dans le récepteur et sélectionner le menu de liste serveurs, puis appuyez sur le bouton de recherche sur télécommande

Un message s'affiche (vous voulez charger les paramètres), cliquez sur Oui Le récepteur va redémarrer

Cette méthode dans le cas d'une seule ligne
Et pour plusieurs lignes écrire le code comme suit:

cfg~0~0~00000000
cccamd~HOST~PORT~USER~PASS

cfg~0~0~00000000
cccamd~HOST~PORT~USER~PASS

cfg~0~0~00000000
cccamd~HOST~PORT~USER~PASS

Cela ne veut pas dépasser 8 serveurs

De la même façon pour le serveur newcamd:
Exemple:

cfg~0~0~00000000
newcamd~host~port~username~password~DESkey
Remarque: ne fonctionne pas de cette façon, mais après la période de serveurs gratuits car de cette façon vous allez perdre serveur de données gratuitement.

TUTO Créer un Serveur Abox PLUS 3 PROG. OUTILS

Première étape

L’Abox setup (serveur) 

En règle générale tous les programmes Outils que je mis sont compressés avec winrar, et sans aucun mot de passe

 

TUTO Activé le Plugin CCcam en Dreambox

À l'aide de la télécommande:

Appuyer sur:

1. Bouton Bleu
2. Paramètres
3. Options
4. Install from (Gemini-Server) Si vous avez installé l'image "The project Gemini, en plus c'est la meilleur"
5. Sélectionnez Cam et choisissez CCcam2.2.1
6. Confirmez l'installation

Après l'installation, il faut activer le plugin CCcam:

Appuyez sur le bouton bleu

1. Appuyez sur la ligne (on/off Auto-cam)
2. Regardez en bas de page, il faut sélectionner CCcam 2.2.1
3. Appuyez sur la ligne (start/restart Cam)

A ce stade vous avez activé le plugin CCcam,
maintenait il faut installer les deux fichiers envoyés. 

tuto

Et voila le CCcam 2.1.4 s’est correctement installer pour l’activé suivez bien ce qui suit :

1- Appuyez sur le bouton Bleu de la télécommande.

2- Sélectionnez le CCcam 2.1.4 en défilant vers la droite grâce à la touche droite de la télécommande :

faire du sharing avec son demo

1- Le CCcam est un programme qui permet de transmettre les codes entre Dreambox et d’autres récepteurs spéciaux .Le CCcam est comme une messagerie instantanée, il permet à la fois de recevoir et d’émettre des codes pour décrypter des chaînes spécifiques.

Montage d'un DD interne sur DM800 en images

[TUTO] Montage d'un DD interne sur DM800 en images

Tuto en image pour installer un Disque Dur Interne sur une dream800 HD

Vous montez votre Disque Dur

Ensuite vous pouvez paramétrer vos enregistrements

Il ne reste plus qu'a admirer vos enregistrements

PS:Pour ceux qui ont le message Disque dur non initialisé ou absent

il faut faire cette manip

différence entre un Smargo original et cloné

The Smargo Smartreader Plus is the leading smartcard reader in the market. Because of the success a low quality Chinese clone product was introduced on the market. The fake smartreader can damage smartcards, resets often during operations and usually breaks down after a while.
We want to help customers to determine that they purchase a high quality genuine smartreader with 1 year full guarantee.

HOW TO RECOGNIZE A REAL SMARTREADER

You can determine very easily if a smartreader is a clone on the following:

1 New arrow model --------- Housing, sticker and improved firmware version 1.04 or higher

We stopped production of the round shape around 1st quarter of 2009. The housing of a genuine Smargo Smartreader has an arrow shape. Besides the new housing, we only use the MaxDigital brand. On the back of the Smargo Smartreader you find a sticker. The Max Digital logo can only be found at a real Smargo Smartreader. The new models will be shipped from the 2nd quarter of 2010 only with new 1.04 software or higher.

2 Do NOT buy the old model smartreader !!! It is not available anymore and therefore probably fake.

If you buy nowadays a smargo Smartreader with round case, you will probably have a fake/clone version.
Some clones can be detected by opening the housing. The warranty of a genuine smargo smartreader will not void because of opening the case.

Smartcard connector inside the housing

If you open the smartreader you will see letters on the black smartcard connector. The letters "MUP" indicate that your smartreader is a fake.

Black Hole Vu+ Solo 1.6.5

black Hole Vu+ Solo 1.6.5

What is new ?

Based on official image 5.11

New Skin Beyounce 14 by Matrix 10

MEDIATOMB updated to ver. 0.12.1
NTFS-3G updated to ver. 2011.4.12.
OpenVPN updated to ver. 2.2.1
VsFTPd updated to ver. 2.3.4
Dropbear updated to ver. 0.53.1

Update blind scan
Update ManualFanControl plugin
Remove udev-static

Driver Update

Lower the default FAN rpm
Increase dynamic range of FAN speed

Change key code of audio button

Change remote control response code
(remote control of uno works only in uno)

Fix occasional not moving FAN problem

Remove udev-static

Instructions to connect the box to your Hdmi-Cec compatible Tv:
1) Enter in your Tv Menu Options and enable all the Hdmi-Cec options.
2) Enter in your Vu+ box Black Hole Hdmi-Cec Panel Setup (blue->blue->Black Hole Hdmi Cec: Configure in this screen the right Hdmi connection port and enable Bh Hdmi-Cec.
3) Click Save (red) button and your box will try to connect with your Tv.
All Done. If your Tv is compatible you can now control Tv and Box with Tv rc.


Multiupload.com - upload your files to multiple file hosting sites!

OpenPLi-Turko v18a DM500s Blue Silver Brushed_HD_By meteor

** LANGUAGES : Turkish , English , Deutch .

D'autres langues peuvent être téléchargées à partir addons


** Yeni bootlogo kullanilmistir.

** Radyo ve scan logolari degistirilmistir.

** CCcam 2.3.0 entegredir.

** Mgcamd 1.38 entegredir.

** Ecminfo entegredir.

** Server bilgileri ozel menu entegredir.

** Inadyn configuration entegredir.

** Movieplayer entegredir.

** Werbezapper entegredir.

** Teletex mevcuttur.

** Guncel cok uydulu satellite.xml kullanilmistir.

** Kanallar help tusu ile yan yana yapilabilir.

** Doluluk orani % 26 dir...


Dream up veya DreamBox-OptiFlasher-v1.0.2
charger la avec ...

Not: L'upload est toujours garantie
Fait avec DREAM UP ...



















d'autres photos ici photo

Download

Evolution 2.6

Evolution 2.6 Dreambox edition
Dreambox 500/56x0/7000
Technical Infos: 
CVS Version: 04.01.2011 
Linux kernel version: 2.6.9 
GCC 3.4.4 Original CVS 
Web Inteface 6.0.4-Expert 
Busybox 1.01
 
BLUE - Blue Panel (Emu Addons) 
YELLOW - plugins 
RED - EPG 
GREEN - subservices 
Blue Panel Info: 
Start/Stop Emu 
Green - News 
Red - Sys Info 
Blue - Addons 
Yellow - Settings 
Addons info: 
Download Addons - Emus,keys,Plugins,Setting.... 
Manual Install Addons tar.bz2 
Delite Addons 
-------- New in Evolution 2.6 --------------
Update CVS
Update libc.so.6 (important)
Fix Oscam new version not working (symbol getaddrinfo)
Fix total tv epg
Fix not working plugins on dm500
Fix VLCF on dm500
Fixes......
New Bootlogo

 









DM500_Evolution2.6.rar

Gemini 4.70-CCcam 2.2.1-Supervison Skin By Abdonda3if

Gemini 4.70-CCcam 2.2.1-Supervison Skin By Abdonda3if



27.08.11
[/CENTER]




I offer you today this amendment on the image Gemini 4.70 ...
Without lengthening with images ...

PC-Tool Bouquet Editor Suite

Feature: Streaming server to stream video to your smartphone/computer over internet
Feature: Complete rewrite of the streaming function for VLC > 1.0.5 (better quality and more features)
Feature: Infobar and epg now work with Windows XP too
Feature: Add function to delete the air video thumbnail cache
Feature: Add function to restore the main directory to default and clear the service directory
Feature: Add logo and program name for windows volumecontrol (mixer)
Feature: Check for existing pathes each start
Feature: EPG Refresh now work with the epg refresh plugin from ritzMo
Feature: Copy picon referece from contextmenu to clipboard
Feature: Check for encrypted channel (Not for all channels the data set correct)
Feature: Add russian language file to setup
Critical Fix: Changes on the data now saved direct without save
Fix: Change Air Video channel endocing to ASCII to solve the Problems with umlauts.(All umlauts removed)
Fix: KingOfSat parsing now work with the new design
Fix: Change default CoolTVGuide mini picon size to 50x28
Fix: On load bouquetlist don't flicker anymore
Fix: Save channel from channel > details now saved correct 
Fix: Download logo now don't crash anymore when channelname is empty
Fix: Move bouquet channels now select the correct channel and dont show an error
Fix: Air video export channel counting now ignores marker/alternatives
Fix: Check unused picons now works with all directorys and don't remove options picons anymore
Fix: Save as .bef file now saved in the correct format
Fix: Parental control now work from the context menu
Fix: Improve timeout for picon export
Fix: Lyngsat Logo update works now correct
Fix: Some language issues

 http://www.multiupload.com/NHQ8GRC3W0

DragBox-Toolbox for Dreambox

=================================
=== DragBox-Toolbox for Dreambox ===
====(versao 1.13 de 24.09.2011)=====
=================================



DreamUp1338
Dreamset234
Dcc-E2-141
Sunray-FlashUP
OptiFlasher-E2
FerrariFiller_1_3_3_7FSE
Dreamstream
PicMan
DreamUP1.3.3.4
Dcc296
Dream_Logo_Generator
Flashwizard_6.3
DreamUpLAN
EnigmaTools
DogSettings
DreamBoxEdit


49.07 MB


Pass: dragteam.info




MEGAUPLOAD - The leading online storage and file delivery service

ou

Hotfile.com: Transfer de fisiere cu 1 singur click: Dragbox.rar

FileZilla Server 0.9.38 released

FileZilla Server 0.9.38 released

2011-06-05

New features:

IPv6 support
Range, wildcard, regular expression and dot-decimal notation subnet IP address filters have been removed. These filter rules need to be recreated using CIDR notation.

Bugfixes and minor changes:

Upon /reload-config, notify all running instances, not just the first found.
Report correct physical path of aliases in administration interface
Fix reply code on permanent bans, not of 5yz type
Increased default size of socket buffers
Fix a crash when entering invalid IP filters
Fixed a crash when a connection closes
Updated to most recent OpenSSL version

http://www.multiupload.com/6X5OTJFAF6

How To Repair Dead DM500S With JTAG

How to Repair Dead DM500S With JTAG (1)

1.      Hardware Connection

LPT--------------------------DM500

2---------100 ohms---------11 ( HALT)

3---------100 ohms---------9 (TMS)

4---------100 ohms---------7 (TCK)

5---------100 ohms---------3 (TDI)

11--------100 ohms---------1 (TDO)

25 ----------------------------16 (GND)

 

2.      Connect the LPT MALE port to your PC, and then power on the DM500S.

3.      In the “Start” - “Run” menu, execute “cmd”.

 

4.      Execute “Jtag.exe -m dm500 -e 00:09:34:XX:XX:XX” (XX should either be numbers 0-9 or letters a-f), then the bootloader of DM500S will be downloaded into the FLASH memory.

5.      Several minutes later, the bootloader will be written into the FLASH memory successfully.

6.      Power off the DM500S, and remove the LPT MALE port from your PC. Then you can transfer an image to DM500S with DreamUp.

●    For more usages of JtagDm500.exe, please execute “JtagDm500.exe -h”.

●    You can change the MAC address of your working DM500S with JTAG and JtagDm500.exe.

How to use SBCL/ vplug

How to use SBCL with a Dreambox


Introduction

It is possible to watch TPS with a Dreambox. To do this you need to install SBCL/ vplug on your PC and to modify a config file on your Dreambox. You will then to put the new TPS files onto your PC each day.

How To Change Root Password If You Don't Know It

I'm completely new to the whole Dreambox scene so forgive me if I'm teaching people how to suck eggs.

I got my first Dreambox today, a DM500S, and found that I couldn't log in as root. Seems the little bugger is set up as a cardsharing machine and the bloke I bought it off won't answer my emails asking for the root password. He seems to think I'll be happy to pay 300 bucks a year for the privilige of using his Cardserver.

How To Setup A Linux PC Card Server

Hi guys, I've wanted to do this for a while and have finally got round to making it happen. Since buying my enormouse 24" iMAC my old ASUS pc has been sat on the bench in the garage doing nothing. Well now it has a very important job. It now runs flawlessly serving my little white card around my house and beyond.

How to setup a Linux PC Card Server.

Prerequisites :-

1. A networked PC that has no real purpose in life.
2. A clean install of ubuntu desktop edition. ( _http://www.ubuntu.com/GetUbuntu/download )
3. Configured telnet access to ubuntu.
4. Configured FTP server on ubuntu.
5. Omnikey 3121 USB card reader. ( _http://www.omnikey.com )
6. 1 - 2 spare hours.



I'm not going into the initial setup of Ubuntu , telnet or FTP as there are many places you can find help with that. Its dead easy !

At this point I should mention that much of this setup is done using command line instructions, in my case executed from my mac via telnet. You can of course use putty in windows or do it locally on the ubuntu machine in a terminal window. I wll not stipulate the difference between these options, thats up to you.

Reset Root Password, Plugin

If you want to gain root access to your Dreambox. you've forgotten the password or whatever, you can use this plugin.