7 simple steps to update your device with the latest v875 map

To update your device with the latest v875 map, follow these simple steps:

1) VERY IMPORTANT: Connect your device to your computer via USB. Using Windows Explorer, open your TomTom drive and backup the complete contents of your TomTom.

2) Check your navcore version. You can do this either on the device menu under Version Info, or you can check the navcore version in TomTom Home when the device is connected to your computer.

3) Check which map is compatible with your navcore using the latest v875 compatibility chart here:



4) Delete the old map folder.

5) Copy across the new map folder into the root of the device.

6) Download the latest version of FastActivate Premium Edition from the FastActivate thread here:


Unzip the file and copy across FastActivate.exe to the TomTom drive (the root of the device).

7) Run FastActivate.exe from the TomTom drive, clicking on all 4 options in order, waiting for each to complete:
Update meta, activate maps, patch navcore & home.


The v875 Australia maps you'll need are found below:

TUTORIAL: Clean Install - How to install the latest map and navcore from scratch!

This tutorial is for TomTom standalone devices only - not WinCE or PDA devices. In addition, if your device was made anytime from September 2010 onwards, (for eg. the GO 1000 series, GO LIVE 800 series, Start 20 series and all VIA models) it cannot be updated this way, as mentioned here:



Before proceeding with this tutorial, if your device has a card slot and you normally use the card, insert it now. As long as the card is inserted, it won't affect the internal memory (if your device has internal memory).


Follow these steps precisely and you will have updated software, as good as new!


1) VERY IMPORTANT: Connect your device to your computer via USB. Using Windows Explorer, open your TomTom drive and backup the complete contents of your TomTom.

2) Open your TomTom drive and delete the contents.

3) Install the latest version of TomTom Home from the TomTom website.

4) Run TomTom Home. Depending on your model, if Home asks you whether to use internal memory or the card, select the card.

5) Go to updates and download the latest navcore. Restart TomTom Home and run updates several times until no more updates are available.

6) Unplug your TomTom device. Start your TomTom on its own. This will create a new ttgo.bif file which will be needed for patching later.

7) Check your navcore version. You can do this either on the device menu under Version Info, or you can check the navcore version in TomTom Home.

8) Reconnect your TomTom to your computer.

9) Run TomTom Home on your computer and go to the "Operate" function. This may be called "Operate My TomTom" or "Operate My Go" or similar, depending on your model. You may get an error message when doing so, just ignore it. The purpose of running the Operate function in Home at this stage is to create the dll profile needed for patching later.

10) Shut down TomTom Home.

11) Check which map is compatible with your navcore using the latest compatibility chart here:



12) Download the compatible map. For Australia, use one of the following:

- for Navcore versions 8.2xxx or higher

- for Navcore versions under 8.2

13) Extract the map, and copy across the new map folder into the root of the device. Make sure when you open the map folder it only contains the map files, not another folder within a folder.

14) Copy across the Voices folder from your backup into the root of the device. Or you can download free voices from TomTom Home.

15) Download the latest version of FastActivate Premium Edition:



16) Extract the file and copy across FastActivate.exe to the TomTom drive (the root of the device).

17) Run FastActivate.exe from the TomTom drive, clicking on all 4 options in order, waiting for each to complete: Update meta, activate maps/cams, patch navcore & Home.

18) Disconnect your TomTom from the computer and power it on.

How to save your favorites when updating your device

To save your favorites, recent destinations and other settings from an old map, follow these simple steps:

1) Copy paste your old mapsettings.cfg file from the old map folder into the new map folder. Overwrite when prompted.
2) Run  HOME and go to the "Operate" function
3) In the menu, add a new Favorite - any favorite (you can always delete this later).
4) Reboot. Test.

The above procedure saves the mapsettings.cfg in the correct format. It is often the solution to many rebooting or freezing problems.

If you can't get into the Operate function in HOME, then you need to patch HOME with FastActivate Premium Edition.

TUTORIAL: Clean Install - How to install the latest map and navcore from scratch!

This tutorial is for  standalone devices only - not WinCE or PDA devices. In addition, if your device was made anytime from September 2010 onwards, (for eg. the GO 1000 series, GO LIVE 800 series, Start 20 series and all VIA models) it cannot be updated this way, as mentioned here:



Before proceeding with this tutorial, if your device has a card slot and you normally use the card, insert it now. As long as the card is inserted, it won't affect the internal memory (if your device has internal memory).


Follow these steps precisely and you will have updated software, as good as new!


1) VERY IMPORTANT: Connect your device to your computer via USB. Using Windows Explorer, open your drive and backup the complete contents of your TomTom.

2) Open your  drive and delete the contents.

3) Install the latest version of TomTom Home from the TomTom website.

4) Run TomTom Home. Depending on your model, if Home asks you whether to use internal memory or the card, select the card.

5) Go to updates and download the latest navcore. Restart TomTom Home and run updates several times until no more updates are available.

6) Unplug your TomTom device. Start your TomTom on its own. This will create a new ttgo.bif file which will be needed for patching later.

7) Check your navcore version. You can do this either on the device menu under Version Info, or you can check the navcore version in TomTom Home.

8) Reconnect your TomTom to your computer.

9) Run TomTom Home on your computer and go to the "Operate" function. This may be called "Operate My TomTom" or "Operate My Go" or similar, depending on your model. You may get an error message when doing so, just ignore it. The purpose of running the Operate function in Home at this stage is to create the dll profile needed for patching later.

10) Shut down TomTom Home.

11) Check which map is compatible with your navcore using the latest compatibility chart here:



12) Download the compatible map from the TomTom Maps section:



13) Extract the map, and copy across the new map folder into the root of the device. Make sure when you open the map folder it only contains the map files, not another folder within a folder.

14) Copy across the Voices folder from your backup into the root of the device. Or you can download free voices from TomTom Home.

15) Download the latest version of FastActivate Premium Edition:



16) Extract the file and copy across FastActivate.exe to the TomTom drive (the root of the device).

17) Run FastActivate.exe from the TomTom drive, clicking on all 4 options in order, waiting for each to complete: Update meta, activate maps/cams, patch navcore & Home.

18) Disconnect your TomTom from the computer and power it on.

Exécuter cccam et newcamd sur samsat HD55 via USB Read more

Aujourd'hui, nous allons expliquer le fonctionnement des lignes cccam et newcamd avec samsat HD55
Ainsi que la façon de mise a jour les lignes par USB.

Pour exécuter le serveur cccam pas de moyen facile et le processus en suivant ces étapes:
Ouvrez le Bloc-notes et d'écrire une ligne comme suit:

cfg~0~0~00000000
cccamd~HOST~PORT~USER~PASS

Ensuite, enregistrez le fichier avec ce nom: hsdata.cfg

Et mettre ce fichier dans la clé USB.

Puis placer le flash dans le récepteur et sélectionner le menu de liste serveurs, puis appuyez sur le bouton de recherche sur télécommande

Un message s'affiche (vous voulez charger les paramètres), cliquez sur Oui Le récepteur va redémarrer

Cette méthode dans le cas d'une seule ligne
Et pour plusieurs lignes écrire le code comme suit:

cfg~0~0~00000000
cccamd~HOST~PORT~USER~PASS

cfg~0~0~00000000
cccamd~HOST~PORT~USER~PASS

cfg~0~0~00000000
cccamd~HOST~PORT~USER~PASS

Cela ne veut pas dépasser 8 serveurs

De la même façon pour le serveur newcamd:
Exemple:

cfg~0~0~00000000
newcamd~host~port~username~password~DESkey
Remarque: ne fonctionne pas de cette façon, mais après la période de serveurs gratuits car de cette façon vous allez perdre serveur de données gratuitement.

TUTO Créer un Serveur Abox PLUS 3 PROG. OUTILS

Première étape

L’Abox setup (serveur) 

En règle générale tous les programmes Outils que je mis sont compressés avec winrar, et sans aucun mot de passe

 

TUTO Activé le Plugin CCcam en Dreambox

À l'aide de la télécommande:

Appuyer sur:

1. Bouton Bleu
2. Paramètres
3. Options
4. Install from (Gemini-Server) Si vous avez installé l'image "The project Gemini, en plus c'est la meilleur"
5. Sélectionnez Cam et choisissez CCcam2.2.1
6. Confirmez l'installation

Après l'installation, il faut activer le plugin CCcam:

Appuyez sur le bouton bleu

1. Appuyez sur la ligne (on/off Auto-cam)
2. Regardez en bas de page, il faut sélectionner CCcam 2.2.1
3. Appuyez sur la ligne (start/restart Cam)

A ce stade vous avez activé le plugin CCcam,
maintenait il faut installer les deux fichiers envoyés.